Author Topic: Jim @ Louisville Palace Roll Call - 11/21/2018  (Read 1298 times)

stopgo

  • member
  • **
  • Posts: 20
Re: Jim @ Louisville Palace Roll Call - 11/21/2018
« Reply #20 on: Nov 26, 2018, 12:38 PM »
I saw mics set up by the soundboard.  Anyone know who taped it and if it's going to circulate?


Mr. White

  • got that old time feeling
  • *****
  • Posts: 2132
    • My YouTube Channel
Re: Jim @ Louisville Palace Roll Call - 11/21/2018
« Reply #21 on: Nov 26, 2018, 02:50 PM »
I saw mics set up by the soundboard.  Anyone know who taped it and if it's going to circulate?

I was up in the Loge on the front row and actually spent a fair amount of time talking to our favorite Tapers. They were Brent Stober and Brian Porter. I even got a picture of them together after the show. I also did my own Taping. I used my TASCAM DR-05 (real little recorder that fits in your hand). I asked them all kinds of questions about how they get their rigs into venues, how they set up their stuff, and about recording levels (seems I had mine set too high again and got a bit of fuzzy distortion whenever Jim howled extra loudly or when they jammed out near the end). I've been checking both of their accounts several times a day to see if they had their recordings up yet. Nothing as of this posting (2:50 p.m. on Monday, November 26, 2018). The three videos I've posted so far had the least amount of fuzziness and a minimal amount of some dude talking (much of my recording had this dude talking).

Edit: Also, Brian and Brent (and myself) had our mics on the wooden board that protruded out from the Loge (Balcony in front of the Balcony) in the dead center of the venue. It looks like the board was above the projector that probably is used whenever the venue plays movies.

Here's a couple of links to their accounts on Internet Archives.

Brian Porter
https://archive.org/search.php?query=taper%3A%22Brian+Porter%22&page=4

Brent Stober
https://archive.org/details/@stober

stopgo

  • member
  • **
  • Posts: 20
Re: Jim @ Louisville Palace Roll Call - 11/21/2018
« Reply #22 on: Nov 26, 2018, 03:01 PM »
I saw mics set up by the soundboard.  Anyone know who taped it and if it's going to circulate?

I was up in the Loge on the front row and actually spent a fair amount of time talking to our favorite Tapers. They were Brent Stober and Brian Porter. I even got a picture of them together after the show. I also did my own Taping. I used my TASCAM DR-05 (real little recorder that fits in your hand). I asked them all kinds of questions about how they get their rigs into venues, how they set up their stuff, and about recording levels (seems I had mine set too high again and got a bit of fuzzy distortion whenever Jim howled extra loudly or when they jammed out near the end). I've been checking both of their accounts several times a day to see if they had their recordings up yet. Nothing as of this posting (2:50 p.m. on Monday, November 26, 2018). The three videos I've posted so far had the least amount of fuzziness and a minimal amount of some dude talking (much of my recording had this dude talking).

Edit: Also, Brian and Brent (and myself) had our mics on the wooden board that protruded out from the Loge (Balcony in front of the Balcony) in the dead center of the venue. It looks like the board was above the projector that probably is used whenever the venue plays movies.

Here's a couple of links to their accounts on Internet Archives.

Brian Porter
https://archive.org/search.php?query=taper%3A%22Brian+Porter%22&page=4

Brent Stober
https://archive.org/details/@stober


Great news and great info.  Will keep a lookout.


Mr. White

  • got that old time feeling
  • *****
  • Posts: 2132
    • My YouTube Channel
Re: Jim @ Louisville Palace Roll Call - 11/21/2018
« Reply #23 on: Nov 27, 2018, 10:47 AM »


Tapers - Brent Stober & Brian Porter after the Jim Solo Show at the Louisville Palace on Wednesday, November 21, 2018

slappymoe

  • got that old time feeling
  • *****
  • Posts: 706
Re: Jim @ Louisville Palace Roll Call - 11/21/2018
« Reply #24 on: Dec 07, 2018, 08:01 AM »